LaserPecker LP5 / PETG (teal) 3D print

PETG (teal) 3D print on LaserPecker LP5

youtube mark
Test on scrap first. Settings are starting points from the linked source.
Machine
LaserPecker LP5
Laser type
fiber
Wattage
20W
Material
PETG (teal) 3D print
Operation
mark
Power
100%
Speed
Depth 25% (LaserPecker speed control)
Passes
1
Frequency / pulse
26 kHz
Notes
Read from the on-screen winning test chip (material / 1064 nm / power % / depth % / passes / kHz) in The Next Layer's video, transcript via Aurora Whisper. He found color and opacity matter far more than polymer type: dark filaments need very low intensity and mark light/gray, light colors need high intensity and mark dark; translucent filaments (some white PLA, semi-translucent orange) resist dark marks. The 450 nm diode mostly failed on plastics. Ventilate. Test on scrap.
Source: The Next Layer
Summarized from the linked source. Always test on scrap before production runs.