PLA (dark navy) 3D print on LaserPecker LP5
youtube markTest on scrap first. Settings are starting points from the linked source.
Machine
LaserPecker LP5
Laser type
fiber
Wattage
20W
Material
PLA (dark navy) 3D print
Operation
mark
Power
10%
Speed
Depth 5% (LaserPecker speed control)
Passes
1
Frequency / pulse
26 kHz
Notes
Read from the on-screen winning test chip (material / 1064 nm / power % / depth % / passes / kHz) in The Next Layer's video, transcript via Aurora Whisper. He found color and opacity matter far more than polymer type: dark filaments need very low intensity and mark light/gray, light colors need high intensity and mark dark; translucent filaments (some white PLA, semi-translucent orange) resist dark marks. The 450 nm diode mostly failed on plastics. Ventilate. Test on scrap.
Source: The Next Layer