LaserPecker LP5 / PLA (lavender/purple) 3D print

PLA (lavender/purple) 3D print on LaserPecker LP5

youtube mark
Test on scrap first. Settings are starting points from the linked source.
Machine
LaserPecker LP5
Laser type
fiber
Wattage
20W
Material
PLA (lavender/purple) 3D print
Operation
mark
Power
100%
Speed
Depth 25% (LaserPecker speed control)
Passes
1
Frequency / pulse
26 kHz
Notes
Read from the on-screen winning test chip (material / 1064 nm / power % / depth % / passes / kHz) in The Next Layer's video, transcript via Aurora Whisper. He found color and opacity matter far more than polymer type: dark filaments need very low intensity and mark light/gray, light colors need high intensity and mark dark; translucent filaments (some white PLA, semi-translucent orange) resist dark marks. The 450 nm diode mostly failed on plastics. Ventilate. Test on scrap.
Source: The Next Layer
Summarized from the linked source. Always test on scrap before production runs.