PLA (black, 3D-printed Bambu Lab) on xTool F1 Ultra
guide engraveTest on scrap first. Settings are starting points from the linked source.
Machine
xTool F1 Ultra
Laser type
fiber
Wattage
20W
Material
PLA (black, 3D-printed Bambu Lab)
Operation
engrave
Power
30%
Speed
3000 mm/s
Passes
1
Line interval / DPI
120 lines/cm
Notes
L3D Accessories (Chris) called 30% at 3000 mm/s a close second to his preferred 20% / 3000 mm/s result on the same F1 Ultra Fiber IR black-PLA test grid (120 lines/cm, 1 pass). XCS. Test on scrap; ventilate.
Source: L3D Accessories (Chris) · 2026-11-08