ComMarker Titan / ABS plastic

ABS plastic on ComMarker Titan

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Titan
Laser type
fiber
Wattage
60W
Material
ABS plastic
Operation
engrave
Power
15%
Speed
500 mm/s
Frequency / pulse
30 kHz
Line interval / DPI
0.03 mm
Notes
Official ComMarker blog "Laser Engraving ABS Plastic" recommended starting settings for a 60W fiber laser with 200 mm lens. The same article says fiber/MOPA can mark ABS with precise adjustment; focus about 0.8 mm below the surface (about half a turn of the knob on ComMarker fiber machines); ventilate; test a grid first. Dark ABS: lower power and multiple passes.
Source: ComMarker · 2026-04-18
Summarized from the linked source. Always test on scrap before production runs.