ComMarker Omni X / White ABS

White ABS on ComMarker Omni X

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni X
Laser type
UV
Wattage
12W
Material
White ABS
Operation
engrave
Speed
2000 mm/s
Passes
1
Frequency / pulse
50 kHz
Line interval / DPI
0.03 mm
Notes
Official ComMarker blog "Laser Engraving ABS Plastic" recommended starting settings, sample for 12W with 250 mm lens: pulse 15, one pass. Focus about 0.8 mm below the surface; use low power/high speed to limit heat; ventilate (ABS fumes). Dark ABS absorbs more easily — lower power and multiple passes. Always test a grid first.
Source: ComMarker · 2026-04-18
Summarized from the linked source. Always test on scrap before production runs.