Plastic headphone case (thin plastic) on ComMarker Omni 1
official engraveTest on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1
Laser type
UV
Wattage
5W
Material
Plastic headphone case (thin plastic)
Operation
engrave
Speed
1000 mm/s
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
0.03 mm
Notes
Official ComMarker Omni 1 UV guide: plastic headphone-case engraving, 150 mm lens, Q-pulse 15. Mask with low-tack tape to reduce melt lines; high speed (1000 mm/s) helps keep thin plastics from warping; Q-pulse 15 gives deep contrast on matte surfaces. Q-pulse is the energy control (this UV guide does not list a power %).
Source: ComMarker