ComMarker Omni 1 / MDF

MDF (4 mm) on ComMarker Omni 1

official cut
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1
Laser type
UV
Wattage
5W
Material
MDF
Thickness
4 mm
Operation
cut
Speed
40 mm/s
Passes
15
Frequency / pulse
40 kHz
Notes
Official ComMarker Omni 1 UV guide: 4 mm MDF cutting, 150 mm lens, Q-pulse 1, 15 passes. Lighter passes (10× at 75 mm/s) reduce charring; vacuum dust every 2–3 passes; seal edges. Q-pulse is the energy control (this UV guide does not list a power %).
Source: ComMarker
Summarized from the linked source. Always test on scrap before production runs.