ComMarker Omni 1 / Leather badge (veg-tan)

Leather badge (veg-tan) on ComMarker Omni 1

official cut
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1
Laser type
UV
Wattage
5W
Material
Leather badge (veg-tan)
Operation
cut
Speed
100 mm/s
Passes
5
Frequency / pulse
40 kHz
Notes
Official ComMarker Omni 1 UV guide: leather badge cut pass, 150 mm lens, Q-pulse 1, line mode, 5 passes. Mark first, then cut. Q-pulse is the energy control (this UV guide does not list a power %).
Source: ComMarker
Summarized from the linked source. Always test on scrap before production runs.