Coconut shell on ComMarker Omni 1
official engraveTest on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1
Laser type
UV
Wattage
5W
Material
Coconut shell
Operation
engrave
Speed
1000 mm/s
Passes
2
Frequency / pulse
40 kHz
Line interval / DPI
0.03 mm
Notes
Official ComMarker Omni 1 UV guide: coconut-shell engraving, 150 mm lens, Q-pulse 5, two passes. Lightly sand first; results vary by shell, so test a scrap; use a dust mask. Q-pulse is the energy control (this UV guide does not list a power %).
Source: ComMarker