Glass on ComMarker Omni 1
official engraveTest on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1
Laser type
UV
Wattage
5W
Material
Glass
Operation
engrave
Speed
200 mm/s
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
0.03 mm
Notes
Official ComMarker Omni 1 UV guide: glass engraving, 150 mm lens, Q-pulse 1. Apply a thin layer of dish soap or a damp paper towel to reduce micro-chipping; engrave slowly to avoid cracks; polish edges afterward. Same settings can be used on a rotary for glass ornaments. Q-pulse is the energy control (this UV guide does not list a power %).
Source: ComMarker