Clear acrylic (photo / raster) on ComMarker Omni 1
official engraveTest on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1
Laser type
UV
Wattage
5W
Material
Clear acrylic (photo / raster)
Operation
engrave
Speed
400 µs (dot duration, as listed)
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
0.03 mm (tip)
Notes
[bitmap mode] Official ComMarker Omni 1 UV guide: photo engraving on acrylic, 150 mm lens, Q-pulse 1, 400 DPI, raster image mode. Use Atkinson dithering for smooth greys; keep 0.03 mm line interval; 5 mm acrylic for deeper engraving. Speed is listed as 400 us (dot duration), not mm/s. Q-pulse is the energy control (this UV guide does not list a power %).
Source: ComMarker