Clear acrylic on ComMarker Omni 1
official engraveTest on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1
Laser type
UV
Wattage
5W
Material
Clear acrylic
Operation
engrave
Speed
500 mm/s
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
0.03 mm
Notes
Official ComMarker Omni 1 UV material-settings guide (German): clear acrylic engraving, 150 mm F-theta lens, Q-pulse 1. Tape the back with painter's tape to reduce smoke residue; engrave from the back for a frosted-glass effect; test a corner on acrylic thicker than 3 mm. Q-pulse is the energy control (this UV guide does not list a power %).
Source: ComMarker