Non-transparent Plastic on Gweike G2
official markTest on scrap first. Settings are starting points from the linked source.
Machine
Gweike G2
Laser type
fiber
Material
Non-transparent Plastic
Operation
mark
Power
15%
Speed
1000 mm/s
Passes
1
Frequency / pulse
30 kHz
Line interval / DPI
0.1-0.001 mm (adjust as needed)
Notes
[vector mode] Official Gweike Cloud "Setting parameter for Gweike G2" vector table (2024-10-22). Picture mode on same page uses frequency 30-80 kHz, dotting time 0.1 ms (0.5 ms stainless), ~500 DPI. Reference only; adjust to marking result.
Source: Gweike Cloud · 2024-10-22