Gweike G2 / Brass

Brass on Gweike G2

official mark
Test on scrap first. Settings are starting points from the linked source.
Machine
Gweike G2
Laser type
fiber
Material
Brass
Operation
mark
Power
70%
Speed
1000 mm/s
Passes
1
Frequency / pulse
30 kHz
Line interval / DPI
0.1-0.001 mm (adjust as needed)
Notes
[vector mode] Official Gweike Cloud "Setting parameter for Gweike G2" vector table (2024-10-22). Picture mode on same page uses frequency 30-80 kHz, dotting time 0.1 ms (0.5 ms stainless), ~500 DPI. Reference only; adjust to marking result.
Source: Gweike Cloud · 2024-10-22
Summarized from the linked source. Always test on scrap before production runs.