xTool Laserbox / Mahogany Plywood

Mahogany Plywood (3 mm) on xTool Laserbox

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool Laserbox
Laser type
CO2
Wattage
40W
Material
Mahogany Plywood
Thickness
3 mm
Operation
engrave
Power
10%
Speed
130 mm/s
Passes
1
Line interval / DPI
90 lines/cm
Notes
[fill mode] Official xTool support "Recommended Material Processing Parameters for Laserbox" (40W, lab conditions, reference only), row 43; bi-directional.
Source: xTool Support · 2023-09-19
Summarized from the linked source. Always test on scrap before production runs.