LaserPecker LP5 / Leatherette

Leatherette on LaserPecker LP5

official cut
Test on scrap first. Settings are starting points from the linked source.
Machine
LaserPecker LP5
Laser type
diode
Material
Leatherette
Operation
cut
Power
67%
Speed
Depth 80% (LaserPecker depth, not mm/s)
Passes
1
Notes
Official LaserPecker LP5 recommended starting settings table (450 nm diode, focal length 150 mm column), Line Cutting at 1k resolution. Values shown as Power%/Depth%; LaserPecker notes results vary by firmware (settings also in LDS 2.9.x+ / app 5.9.x+).
Source: LaserPecker
Summarized from the linked source. Always test on scrap before production runs.