Corrugated cardboard (3 mm) on xTool P2S

guide cut

Test on scrap first. Settings are starting points from the linked source.

Machine

xTool P2S

Laser type

CO2

Wattage

55W

Material

Corrugated cardboard

Thickness

3 mm

Operation

cut

Power

20%

Speed

120 mm/s

Passes

Notes

Starting values from Laser Generator xTool chart (compiled from xTool published examples and maker charts). Test on scrap; focus and air assist not specified.

Source: Laser Generator (compiled from xTool examples + community) · 2026-10-31

Summarized from the linked source. Always test on scrap before production runs.