xTool P2S / Copy & kraft paper

Copy & kraft paper (80–120 gsm) on xTool P2S

guide cut
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool P2S
Laser type
CO2
Wattage
55W
Material
Copy & kraft paper
Thickness
80–120 gsm
Operation
cut
Power
6%
Speed
250 mm/s
Passes
1
Notes
Starting values from Laser Generator xTool chart (compiled from xTool published examples and maker charts). Test on scrap; focus and air assist not specified.
Source: Laser Generator (compiled from xTool examples + community) · 2026-10-31
Summarized from the linked source. Always test on scrap before production runs.