xTool P2S / Pine & solid softwood

Pine & solid softwood on xTool P2S

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool P2S
Laser type
CO2
Wattage
55W
Material
Pine & solid softwood
Operation
engrave
Power
22%
Speed
300 mm/s
Passes
1
Line interval / DPI
100 lines/cm
Notes
Starting values from Laser Generator xTool chart (compiled from xTool published examples and maker charts). Test on scrap; focus and air assist not specified.
Source: Laser Generator (compiled from xTool examples + community) · 2026-10-31
Summarized from the linked source. Always test on scrap before production runs.