Basswood plywood (5 mm) on xTool P2S

guide engrave

Test on scrap first. Settings are starting points from the linked source.

Machine

xTool P2S

Laser type

CO2

Wattage

55W

Material

Basswood plywood

Thickness

5 mm

Operation

engrave

Power

20%

Speed

300 mm/s

Passes

Line interval / DPI

100 lines/cm

Notes

Starting values from Laser Generator xTool chart (compiled from xTool published examples and maker charts). Test on scrap; focus and air assist not specified.

Source: Laser Generator (compiled from xTool examples + community) · 2026-10-31

Summarized from the linked source. Always test on scrap before production runs.