Creality Falcon T1 / Basswood board

Basswood board (2mm) on Creality Falcon T1

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Creality Falcon T1
Laser type
diode
Wattage
40W
Material
Basswood board
Thickness
2mm
Operation
engrave
Power
2–100% (min–max, image mode)
Speed
1000 (speed unit not stated on page)
Passes
1
Line interval / DPI
0.1 mm
Notes
Official Creality Falcon T1 Diode 40W consumable parameter library, image/photo mode (MinPower/MaxPower/Speed/Passes/Interval) 2/100/1000/1/0.1. Reference only; test on scrap.
Source: Creality Falcon
Summarized from the linked source. Always test on scrap before production runs.