Creality Falcon A1C / Walnut board

Walnut board (5mm) on Creality Falcon A1C

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Creality Falcon A1C
Laser type
IR diode
Wattage
1.2W
Material
Walnut board
Thickness
5mm
Operation
engrave
Power
80%
Speed
2000 (speed unit not stated on page)
Passes
1
Notes
Official Creality wiki table: Falcon A1C 1.2W infrared engraving power/speed/passes 80/2000/1. Reference only; test on scrap.
Source: Creality Falcon
Summarized from the linked source. Always test on scrap before production runs.