Walnut board (3mm) on Creality Falcon A1C
official engraveTest on scrap first. Settings are starting points from the linked source.
Machine
Creality Falcon A1C
Laser type
diode
Wattage
5W
Material
Walnut board
Thickness
3mm
Operation
engrave
Power
25%
Speed
6000 (speed unit not stated on page)
Passes
1
Notes
Official Creality wiki table: Falcon A1C 5W blue diode engraving power/speed/passes 25/6000/1. Reference only; test on scrap.
Source: Creality Falcon