Creality Falcon A1C / Basswood board

Basswood board (10mm) on Creality Falcon A1C

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Creality Falcon A1C
Laser type
diode
Wattage
5W
Material
Basswood board
Thickness
10mm
Operation
engrave
Power
90%
Speed
6000 (speed unit not stated on page)
Passes
1
Notes
Official Creality wiki table: Falcon A1C 5W blue diode engraving power/speed/passes 90/6000/1. Reference only; test on scrap.
Source: Creality Falcon
Summarized from the linked source. Always test on scrap before production runs.