Creality Falcon A1C / Walnut board

Walnut board (5mm) on Creality Falcon A1C

official cut
Test on scrap first. Settings are starting points from the linked source.
Machine
Creality Falcon A1C
Laser type
diode
Wattage
10W
Material
Walnut board
Thickness
5mm
Operation
cut
Power
90%
Speed
200 (speed unit not stated on page)
Passes
2
Notes
Official Creality wiki table: Falcon A1C 10W blue diode cutting power/speed/passes 90/200/2. Reference only; test on scrap.
Source: Creality Falcon
Summarized from the linked source. Always test on scrap before production runs.