xTool F2 Ultra UV / PLA (3D-printed) – test-card range

PLA (3D-printed) – test-card range on xTool F2 Ultra UV

youtube engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2 Ultra UV
Laser type
UV
Wattage
5W
Material
PLA (3D-printed) – test-card range
Operation
engrave
Power
20% minimum (test range)
Speed
1000 mm/s minimum
Passes
1
Notes
Private Maiku (print-farm additive manufacturing specialist): when making UV test cards on PLA, keep speed at 1000 mm/s or more and power from 20% up; slow speeds (10–500 mm/s) burn through the print into the machine. Dark colours (black, dark red, dark blue, brown) marked best; smooth-plate side beats textured. Spoken in video (Whisper transcript).
Source: Private Maiku
Summarized from the linked source. Always test on scrap before production runs.