xTool F2 Ultra UV / Slate Coaster (Painted white then black)

Slate Coaster (Painted white then black) on xTool F2 Ultra UV

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2 Ultra UV
Laser type
UV
Wattage
5W
Material
Slate Coaster (Painted white then black)
Operation
engrave
Power
95%
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
400 DPI
Notes
L3D Accessories tested recipe L3D-F2ULTRAUV-038 (Painted white then black): Slate, Vector, Field lens; dot duration 300 µs. Prep: Light sand + spray paint coatsSand first then a couple layers thin white spray paint, then a layer of black. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.