Beechwood Coaster on xTool F2 Ultra UV
guide engraveTest on scrap first. Settings are starting points from the linked source.
Machine
xTool F2 Ultra UV
Laser type
UV
Wattage
5W
Material
Beechwood Coaster
Operation
engrave
Power
80%
Speed
2500 mm/s
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
250 lines/cm
Notes
L3D Accessories tested recipe L3D-F2ULTRAUV-031: Solid wood & boards, Photo / bitmap, 3D Emboss, 15° angle, Field lens; 100 layers. Descend Z every 10 layers by 0.01mm. Run a small test first.
Source: L3D Accessories