xTool F2 Ultra / Monarch Pines Jewellery (Silver)

Monarch Pines Jewellery (Silver) on xTool F2 Ultra

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2 Ultra
Laser type
MOPA fiber
Wattage
60W
Material
Monarch Pines Jewellery (Silver)
Operation
engrave
Power
50%
Speed
50 mm/s
Passes
1
Frequency / pulse
820 kHz, 250 ns pulse
Line interval / DPI
300 lines/cm
Notes
L3D Accessories tested recipe L3D-F2ULTRA-041 (Silver): Jewellery & annealing, Vector, 40° angle, Crosshatch. Crosshatch, 3mm out of focus. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.