xTool F2 Ultra / Titanium (Deep engrave)

Titanium (Deep engrave) on xTool F2 Ultra

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2 Ultra
Laser type
MOPA fiber
Wattage
60W
Material
Titanium (Deep engrave)
Operation
engrave
Power
100%
Speed
1700 mm/s
Passes
10
Frequency / pulse
60 kHz, 200 ns pulse
Line interval / DPI
280 lines/cm
Notes
L3D Accessories tested recipe L3D-F2ULTRA-025 (Deep engrave): Titanium, Vector, 45° angle, Crosshatch. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.