xTool F2 Ultra / Brass Sheet 0.5mm

Brass Sheet 0.5mm on xTool F2 Ultra

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2 Ultra
Laser type
MOPA fiber
Wattage
60W
Material
Brass Sheet 0.5mm
Operation
engrave
Power
90%
Speed
400 mm/s
Passes
16
Frequency / pulse
30 kHz, 500 ns pulse
Line interval / DPI
200 lines/cm
Notes
L3D Accessories tested recipe L3D-F2ULTRA-002: Brass, Vector. Wobble - diameter 0.05 mm distance 0.015. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.