xTool F2 Ultra / Brass Coin

Brass Coin on xTool F2 Ultra

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2 Ultra
Laser type
MOPA fiber
Wattage
60W
Material
Brass Coin
Operation
engrave
Power
95%
Speed
2200 mm/s
Passes
1
Frequency / pulse
30 kHz, 350 ns pulse
Line interval / DPI
300 lines/cm
Notes
L3D Accessories tested recipe L3D-F2ULTRA-001: Brass, Photo / bitmap, 3D Emboss, 1° angle. Descend at the Z axis (on). Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.