xTool F2 / Pine Disc

Pine Disc on xTool F2

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2
Laser type
diode
Wattage
15W
Material
Pine Disc
Operation
engrave
Power
95%
Speed
450 mm/s
Passes
1
Line interval / DPI
200 lines/cm
Notes
L3D Accessories tested recipe L3D-F2-006: Solid wood & boards, Vector. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.