xTool F2 / xTool Rose Gold Jewellery

xTool Rose Gold Jewellery on xTool F2

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2
Laser type
diode
Wattage
15W
Material
xTool Rose Gold Jewellery
Operation
engrave
Power
100%
Speed
20 mm/s
Passes
1
Line interval / DPI
300 lines/cm
Notes
L3D Accessories tested recipe L3D-F2-010: Jewellery & annealing, Vector, 45° angle, Crosshatch. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.