xTool F2 / White Powder Coated Tumbler

White Powder Coated Tumbler on xTool F2

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2
Laser type
diode
Wattage
15W
Material
White Powder Coated Tumbler
Operation
engrave
Power
100%
Speed
250 mm/s
Passes
1
Line interval / DPI
220 lines/cm
Notes
L3D Accessories tested recipe L3D-F2-037: Powder coated, Vector, Rotary. Do Not move the tumbler must do clean pass. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.