xTool F1 Ultra / Brass Coin

Brass Coin on xTool F1 Ultra

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1 Ultra
Laser type
fiber
Wattage
20W
Material
Brass Coin
Operation
engrave
Power
100%
Speed
900 mm/s
Passes
1
Frequency / pulse
30 kHz
Line interval / DPI
300 lines/cm
Notes
L3D Accessories tested recipe L3D-F1ULTRA-001: Brass, Photo / bitmap, 3D Emboss; 256 layers. 30° Engraving Angle, Descend Z axis 1 x 0.01mm. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.