xTool F1 Ultra / Clear Acrylic (Engraves white)

Clear Acrylic (Engraves white) on xTool F1 Ultra

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1 Ultra
Laser type
fiber
Wattage
20W
Material
Clear Acrylic (Engraves white)
Operation
engrave
Power
60%
Speed
600 mm/s
Passes
1
Frequency / pulse
30 kHz
Line interval / DPI
240 lines/cm
Notes
L3D Accessories tested recipe L3D-F1ULTRA-053 (Engraves white): Clear, Vector. 30khz - Produces White engraving. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.