xTool F1 / Rubber Hockey Puck (Black)

Rubber Hockey Puck (Black) on xTool F1

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1
Laser type
diode
Wattage
10W
Material
Rubber Hockey Puck (Black)
Operation
engrave
Power
85%
Speed
100 mm/s
Passes
2
Line interval / DPI
140 lines/cm
Notes
L3D Accessories tested recipe L3D-F1-004 (Black): Rubber, Vector. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.