xTool D1 Pro / Walnut plywood

Walnut plywood (6mm) on xTool D1 Pro

official cut
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool D1 Pro
Laser type
diode
Wattage
20W
Material
Walnut plywood
Thickness
6mm
Operation
cut
Power
80%
Speed
60 mm/s
Passes
1
Notes
Manufacturer table via CutChart (D1 Pro 20W). Test on scrap; air assist/focus often not specified.
Source: Manufacturer via CutChart · 2026-10-02
Summarized from the linked source. Always test on scrap before production runs.