xTool F1 / Slate Coaster

Slate Coaster on xTool F1

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1
Laser type
diode
Wattage
10W
Material
Slate Coaster
Operation
engrave
Power
1-60%
Speed
200 mm/s
Passes
1
Line interval / DPI
400 DPI
Notes
L3D Accessories tested recipe L3D-F1-018: Slate, Photo / bitmap · Grayscale. Grayscale. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.