xTool F1 / Pint Glass (Clear)

Pint Glass (Clear) on xTool F1

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1
Laser type
diode
Wattage
10W
Material
Pint Glass (Clear)
Operation
engrave
Power
1-80%
Speed
400 mm/s
Passes
1
Line interval / DPI
600 DPI
Notes
L3D Accessories tested recipe L3D-F1-010 (Clear): Glassware, Photo / bitmap. Levelled using a jig, works up to 45mm wide. Apply a thin coat of black tempera paint before engraving. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.