xTool F1 / Powder Coated Tumbler (All colours)

Powder Coated Tumbler (All colours) on xTool F1

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1
Laser type
diode
Wattage
10W
Material
Powder Coated Tumbler (All colours)
Operation
engrave
Power
100%
Speed
300 mm/s
Passes
1
Line interval / DPI
220 lines/cm
Notes
L3D Accessories tested recipe L3D-F1-013 (All colours): Powder coated, Vector, Rotary. Works for all colours. Run a small test first.
Source: L3D Accessories
Summarized from the linked source. Always test on scrap before production runs.