xTool D1 Pro / Red transparent glossy acrylic

Red transparent glossy acrylic (3mm) on xTool D1 Pro

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool D1 Pro
Laser type
diode
Wattage
20W
Material
Red transparent glossy acrylic
Thickness
3mm
Operation
engrave
Power
60%
Speed
100 mm/s
Passes
1
Notes
Manufacturer table via CutChart (D1 Pro 20W). Manufacturer fill/raster setting. Test on scrap; air assist/focus often not specified.
Source: Manufacturer via CutChart · 2026-10-02
Summarized from the linked source. Always test on scrap before production runs.