Sculpfun IR-20 fiber module / Iron (rust removal)

Iron (rust removal) on Sculpfun IR-20 fiber module

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Sculpfun IR-20 fiber module
Laser type
IR fiber
Wattage
20W
Material
Iron (rust removal)
Operation
engrave
Power
50% (LightBurn), box power 60%
Speed
10000 mm/min
Passes
1
Frequency / pulse
30 kHz
Line interval / DPI
0.01 mm
Notes
Official Sculpfun IR20 1064nm module engraving table; image mode Dither.
Source: Sculpfun
Summarized from the linked source. Always test on scrap before production runs.