Sculpfun iCube Ultra (1.2W IR) / Slate

Slate on Sculpfun iCube Ultra (1.2W IR)

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Sculpfun iCube Ultra (1.2W IR)
Laser type
IR diode
Wattage
1.2W
Material
Slate
Operation
engrave
Power
100%
Speed
2000 mm/min
Passes
1
Line interval / DPI
0.05 mm
Notes
Official Sculpfun iCube Ultra 1.2W infrared module engraving table; Stucki image mode, acceleration 500.
Source: Sculpfun
Summarized from the linked source. Always test on scrap before production runs.