Ortur LU3-20A/B / Ceramics

Ceramics on Ortur LU3-20A/B

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Ortur LU3-20A/B
Laser type
diode
Wattage
20W
Material
Ceramics
Operation
engrave
Power
100%
Speed
10000 mm/min
Passes
1
Line interval / DPI
15 lines/mm
Notes
Official Ortur LaserGRBL engraving table: M4 (engraving mode), S1000 (S1000=100%), line-to-line tracing. Test on scrap.
Source: Ortur
Summarized from the linked source. Always test on scrap before production runs.