Brown opaque glossy acrylic (2mm) on xTool D1 Pro

official engrave

Test on scrap first. Settings are starting points from the linked source.

Machine

xTool D1 Pro

Laser type

diode

Wattage

20W

Material

Brown opaque glossy acrylic

Thickness

2mm

Operation

engrave

Power

40%

Speed

50 mm/s

Passes

Notes

Manufacturer table via CutChart (D1 Pro 20W). Manufacturer fill/raster setting. Test on scrap; air assist/focus often not specified.

Source: Manufacturer via CutChart · 2026-10-02

Summarized from the linked source. Always test on scrap before production runs.