xTool D1 Pro / Brown opaque glossy acrylic

Brown opaque glossy acrylic (2mm) on xTool D1 Pro

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool D1 Pro
Laser type
diode
Wattage
20W
Material
Brown opaque glossy acrylic
Thickness
2mm
Operation
engrave
Power
50%
Speed
40 mm/s
Passes
1
Notes
Manufacturer table via CutChart (D1 Pro 20W). Test on scrap; air assist/focus often not specified.
Source: Manufacturer via CutChart · 2026-10-02
Summarized from the linked source. Always test on scrap before production runs.