Fiber laser 50W (standard IR galvo) / PLA (black, 3D printed) – white mark

PLA (black, 3D printed) – white mark on Fiber laser 50W (standard IR galvo)

community mark
Test on scrap first. Settings are starting points from the linked source.
Machine
Fiber laser 50W (standard IR galvo)
Laser type
fiber
Wattage
50W
Material
PLA (black, 3D printed) – white mark
Operation
mark
Power
14%
Speed
5000 mm/s
Passes
2
Frequency / pulse
15 kHz
Line interval / DPI
0.065 mm
Notes
u/M_Unimaster: crosshatch enabled, 2 passes with 45° angle advance per pass, focused on the surface; gave clean white marks on black PLA. Commenter suggests slowing TC-on/TC-off timing for fine detail.
Source: u/M_Unimaster · 2025-09-09
Summarized from the linked source. Always test on scrap before production runs.